 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PGE 608 03 Erbium-Doped Fiber Amplifier for Digital Applications Key Features * Operating wavelength window: 15301560 nm * Saturation output power: +16 dBm * Noise figure, typ. <7.0 dB * Serial (RS-232) interface with parallel alarms Applications * Single channel digital applications (SDH/SONET) Description The PGE 608 03 is an integrated, output power-locked amplifier. It has optically isolated input and output ports as well as input and output power monitoring. The serial and parallel interface is provided through a DB-25 electrical connector. The modules are based on industry standard platforms and are optimized for single channel SDH/SONET applications. 1 PGE 608 03 Optical input signal Input power monitor Gain Output power monitor Optical output signal Control Circuitry Alarm and monitor signals Set Commands Figure 1. Block diagram [mm] 15.5 37.8 48.5 129 4 x M3 118 150 Pin 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Description NC NC NC NC Output Power Monitor Input Power Monitor GND Alarm #1 Optical Output Fault Alarm #2 Pump Drive Current Fault Alarm #3 Pump Temperature -5.0 V +5.0 V GND NC NC NC NC Serial output (TTL) Alarm #4 Optical Input Fault Eye-safe Power Control Input Amplifier Disable Input Serial input (TTL) -5.0 V +5.0 V GND. Figure 2. Mechanical outline and pin description 2 124 11 PGE 608 03 Optical Characteristics Electrical and optical characteristics at recommended operating conditions, unless otherwise noted. Parameter Conditions Symbol Min Typ Max Unit Operating Wavelength Input Power Output Power Input/Output Return Loss Noise Figure Small Signal Gain At 1550 nm, Pin = -6 dBm, at RT Over Tc and L. EDFA turned on. Pin = -6dBm < -6 dBm Input, at RT L Pin Pout IRL/ORL NF 1530 15.5 -6 16.0 28 < 7.0 30 1560 16.5 nm dBm dBm dB dB dB Electrical Characteristics Parameter Conditions Symbol Min Typ Max Unit Operating Current Operating Voltage Ripple and Noise Transients - Positive V Transients - Negative Power Dissipation Positive Voltage Negative Voltage Pins # 12 and 24 Pins #11 and 23 On both Positive and Negative Voltage Max. Duration 75 ms Max. Duration 75 ms Over operating temperature and time 4.75 -5.50 4.5 -6.0 5.00 -5.00 2 1 5.50 -4.75 2% PP 6.0 -4.5 10 A A V V V V W Operating Conditions Parameter Symbol Min Typ Max Unit Operating Case Temperature TCase 0 65 C Absolute Maximum Ratings Parameter Symbol Min Max Unit Storage Temperature -40 75 C CAUTION: Stresses outside those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. 3 PGE 608 03 Handling Precautions This device may be damaged as a result of electrostatic discharge (ESD). Take proper precautions during both handling and testing. This typically includes grounded wrist wraps, workbenches and floor mats in ESD controlled areas. Semiconductor devices may be damaged by current surges, use appropriate transient protection. Quality Assurance Ericsson Microelectronics commitment to quality has been proven through a decade of semiconductor device production and has been confirmed to ISO 9001. Opto product qualification is made according to the intention of applicable Telcordia standards. Connector Options SC/SPC SC/APC (Other connectors available on request) DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM WAVELENGTH 1300 nm - 1600 nm CLASS 3B LASER Information given in this data sheet is believed to be accurate and reliable. However no responsibility is assumed for the consequences of its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Ericsson Microelectronics. These products are sold only according to Ericsson Microelectronics' general conditions of sale, unless otherwise confirmed in writing. Product specifications subject to change without notice. Ericsson Microelectronics AB SE-164 81 Kista, Sweden Telephone: +46 8 757 50 00 www.ericsson.com/microelectronics For local sales contacts, please refer to our website or call: Int + 46 8 757 47 00, Fax: +46 8 757 47 76 1522-PGE 608 03 Rev. E (c) Ericsson Microelectronics AB, October 2000 4 |
Price & Availability of PGE60803
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |